MODEL SQ20 SQ20D

Max Speed
650/rpm

Position attached
L Left Type
R Right Type
LR Both Type

Misura Pajet (mm) 3,4,5,7,9

Motore Impulsi Motore x 1

Aria Compressa 0.49 Mpa( 5.0 kgf/㎠ )

Rotolo Pajet (mm) Normale Φ 180

Max. Φ 225 (Option)

MODEL SQ30 SQ30D

Max Speed
DM-series 1,200 rpm
E-series 900 rpm
SB-series 1,000 rpm

Sequin Device Attachment Type
L Left side
R Right side
LR Both sides

Sequin Size (mm) ф3 ~ф9

Motor Pulse Motor x 1 Pulse Motor x 2

Compressed Air 0.49 Mpa (5.0kgf/㎠)

Reel Size (mm) Normal ф180

Max. ф225 (Note : Appendix should be attached)

MODEL SQ40i

Max Speed
DM-series 1,200 rpm
E-series 900 rpm
SB-series 1,000 rpm

Sequin Device Attachment Type
L Left side
R Right side
LR Both sides

Sequin Size (mm) ф3 ~ф9

Motor Pulse Motor x 1 Pulse Motor x 2

Compressed Air 0.49 Mpa (5.0kgf/㎠)

Reel Size (mm) Normal ф180

Max. ф225 (Note : Appendix should be attached)

MODEL ZD10 (L) ZD10 (R)

Max Speed
DM-series 1,000 rpm
E-series 800 rpm
SB-series 800 rpm
CA,CE,TA-Series 800 rpm

ZigZag Device Attachment Type
L Left side
R Right side

Motor Pulse Motor x 1 Pulse Motor x 1

Compressed Air 0.49 Mpa (5.0kgf/㎠)

• Select your cord foot according to the cord thickness.
• To do cording work, pull down the cord bar, chenck the positions of the
  cord foot and the needle hole before starting work.
• Keep your hands well away from the hole of the cord foot when setting it
  manually to the rest position

MODEL Cording

Direction for attached device
L Left side
R Right side
Both L+R

Thickness for thread
1.3 mm ~ 2.5 mm

Press foot (2 Hole Type)

Φ 1.3 mm ~ Φ 1.5 mm
Φ 1.7 mm ~ Φ 2.0 mm
Φ 2.3 mm ~ Φ 2.5 mm

Press foot (1 Hole Type)

Φ 1.3 mm
Φ 1.7 mm
Φ 2.0 mm
Φ 2.5 mm

MODEL Boring

When installing the boring device to the needle bar, make sure the tip of the blade does not touch your finger.

If the boring doesn't work well, adjust the boring blade screw so that the groove at the tip of the blade faces front.
Select boring needle bar in the operation box and boring will work automatically when you move to the designated needle bar during the embroidery work.

MODELLI

TSF